|
.120-.183in / 3.05-4.65mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is .750 in A dimension is .085 in, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-.120-.183
Price:
$759.00
In Basket:
none
|
|
|
|
|
|
|
.183-.240in / 4.65-6.102mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.00in A dimension is .095 in, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-.183-.240
Price:
$531.00
In Basket:
none
|
|
|
|
|
|
|
.240-.300in / 6.10-7.62mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.00in A dimension is .095 in, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-.240-.300
Price:
$469.00
In Basket:
none
|
|
|
|
|
|
|
.300-.485in / 7.62-12.32mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.000 in A dimension is .095 in , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-.300-.485
Price:
$392.00
In Basket:
none
|
|
|
|
|
|
|
.485-.860in / 12.32-21.84mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.000in A dimension is .095 in, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-.485-.860
Price:
$361.00
In Basket:
none
|
|
|
|
|
|
|
.860-1.135in / 21.84-28.83mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.00in A dimension is .095 in , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-.8601.135
Price:
$366.00
In Basket:
none
|
|
|
|
|
|
|
1.135-1.510in / 28.834-38.35mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.00in A dimension is .095 in , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-1.135-1.510
Price:
$396.00
In Basket:
none
|
|
|
|
|
|
|
1.510-2.010in / 38.35-51.05mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.00in A dimension is .095 in , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-1.510-2.01
Price:
$463.00
In Basket:
none
|
|
|
|
|
|
|
2.010-2.510in / 51.05-63.75mm Blind Bore
|
|
Western Gage Chrome plated Air Probe Blind Bore C dimension is 1.00in A dimension is .095 in , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APB-64-C-2.01-2.51
Price:
$542.00
In Basket:
none
|
|
|
|
|
|
|
.120-.183in / 3.05-4.65mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is .750 in A dimension is 6.35mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-.120-.183
Price:
$759.00
In Basket:
none
|
|
|
|
|
|
|
.183-.240in / 4.65-6.102mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 9.53mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size 38-32 UNEF to fit your display unit. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-.183-.240
Price:
$531.00
In Basket:
none
|
|
|
|
|
|
|
.240-.300in / 6.10-7.62mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 9.53mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-.240-.300
Price:
$469.00
In Basket:
none
|
|
|
|
|
|
|
.300-.485in / 7.62-12.32mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.000 in A dimension is 11.18mm , Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-.300-.485
Price:
$392.00
In Basket:
none
|
|
|
|
|
|
|
.485-.860in / 12.32-21.84mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.000in A dimension is 12.7mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-.485-.860
Price:
$361.00
In Basket:
none
|
|
|
|
|
|
|
.860-1.135in / 21.84-28.83mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-.8601.135
Price:
$366.00
In Basket:
none
|
|
|
|
|
|
|
1.135-1.510in / 28.834-38.35mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-1.135-1.510
Price:
$396.00
In Basket:
none
|
|
|
|
|
|
|
1.510-2.010in / 38.35-51.05mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-1.510-2.01
Price:
$463.00
In Basket:
none
|
|
|
|
|
|
|
2.010-2.510in / 51.05-63.75mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-63-C-2.01-2.51
Price:
$542.00
In Basket:
none
|
|
|
|
|
|
|
.120-.183in / 3.05-4.65mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is .750 in A dimension is 6.35mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-.120-.183
Price:
$759.00
In Basket:
none
|
|
|
|
|
|
|
.183-.240in / 4.65-6.102mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 9.53mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size 38-32 UNEF . Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-.183-.240
Price:
$531.00
In Basket:
none
|
|
|
|
|
|
|
.240-.300in / 6.10-7.62mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 9.53mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-.240-.300
Price:
$469.00
In Basket:
none
|
|
|
|
|
|
|
.300-.485in / 7.62-12.32mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.000 in A dimension is 11.18mm , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-.300-.485
Price:
$392.00
In Basket:
none
|
|
|
|
|
|
|
.485-.860in / 12.32-21.84mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.000in A dimension is 12.7mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-.485-.860
Price:
$361.00
In Basket:
none
|
|
|
|
|
|
|
.860-1.135in / 21.84-28.83mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-.8601.135
Price:
$366.00
In Basket:
none
|
|
|
|
|
|
|
1.135-1.510in / 28.834-38.35mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-1.135-1.510
Price:
$396.00
In Basket:
none
|
|
|
|
|
|
|
1.510-2.010in / 38.35-51.05mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-1.510-2.01
Price:
$463.00
In Basket:
none
|
|
|
|
|
|
|
2.010-2.510in / 51.05-63.75mm
|
|
Western Gage Chrome plated Air Probe thru bore C dimension is 1.00in A dimension is 19.05mm , Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe blank will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this probe will be connected to. Note Master(s) will be required for final setting of the air probe so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Handles, hoses and extensions are not included.
Mfr: As Indicated
Code:APT-64-C-2.01-2.51
Price:
$542.00
In Basket:
none
|
|
|
|
|
|
|
Air_Probe-3jets-.300+
|
|
This features adds 3 equally spaced standard jets to air plugs over .300inch in diameter.
Mfr: As Indicated
Code:AP-3jet-.300-plus
Price:
$183.00
In Basket:
none
|
|
|
|
|
|
|
Air_Probe-3jets-.123to.299
|
|
This features adds 3 equally spaced standard jets to air plugs from .123 to .299 inch body diameter.
Mfr: As Indicated
Code:AP-3jet-.123 -.299
Price:
$218.00
In Basket:
none
|
|
|
|
|
|
|
.123-.230 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C.123-.230
Price:
$206.00
In Basket:
none
|
|
|
|
|
|
|
.230-.365 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C.230-.365
Price:
$209.00
In Basket:
none
|
|
|
|
|
|
|
.365-.510 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C.365-.510
Price:
$210.00
In Basket:
none
|
|
|
|
|
|
|
.510-.825 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C .510-.825
Price:
$224.00
In Basket:
none
|
|
|
|
|
|
|
.825-1.135 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C .825-1.135
Price:
$230.00
In Basket:
none
|
|
|
|
|
|
|
1.135-1.510 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C 1.135-1.510
Price:
$281.00
In Basket:
none
|
|
|
|
|
|
|
1.510-2.01 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C 1.510-2.01
Price:
$319.00
In Basket:
none
|
|
|
|
|
|
|
2.01-2.51 Inch or MM Ring Master
|
|
Western Gage Chrome plated Master ring ground to the nominal size you specify between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each when you complete your order.
Mfr: As Indicated
Code:RMG-XX-C 2.01-2.51
Price:
$430.00
In Basket:
none
|
|
|
|
|
|