|
|
 |
|
|
|
|
Thread Rings: Go/NoGo 2A or 3A
Thread Rings: UNJ_Aerospace/Mil/Govt.
Thread Ring: Right Hand Master Setting Plugs
Thread Plugs: UNJ_Aerospace/Mil/Govt.
Thread Plug Assemblies: Go/NoGo 2B or 3B
Thread Pitch, Thread Wires, & True Position Gauges
Thread Gages: Metric Right Hand
Thread Gages NPT, NPTF, NPSM, NPSF
Thread Gages Left Hand UN & Metric)
Thread Gages Helicoil & STI Style
Thread Gage Certifications Long Form
Plug Gauge Go/NoGo Assemblies
Plug Gages Special Progressives
Plug Gages NoGo Assemblies
Plug Gages Hex, Masters,Extra Length
Plug Gages Go
Plain Go & NoGo Ring Gages & Masters
Pin Gages & Sets
Microscopes & Magnifiers
Micrometers & Masters
Master Disc Style Gages
Magnetic Stands
Indicators Digimatic (Digital)
Indicators Dial Type
Holetest, Borematic, Internal Mics & Bore Gages
Height Stands, Dial, Granite
Height Masters
Hardness Testing
Groove Snaps & Special Id / Od Gages
Finish Testing Systems & Styli
Durometers
Drill Blank
Depth & Thickness Gages, Tension, Pitch, Torque
Comparator Stands & Transfer Stands
Chamfer & Center Gauging
Calipers & Caliper Style Gages
Calibration Testers & Stands
Balancing & Vibration Tools
Ammended or Obsolete Part #s
Air Gaging
Custom Packages-Cameron
Air Spindles & Ring Masters
Air Ring Gages & Disc Masters
|
United We Stand. |
SSL Certificate Authority |
|
|
|
|
|
|
Air Gaging
| |
WG Dual Master MilliCheck
|
| |
Edmunds Gage, Moore Gage, Air Gage, Etamic, Sheffield A-E air columns and other adjustable Dial Type air or air -electronic systems are replaced with a Western Gage MilliCheck (AEC-30-10) series with superior resolution and stability. It provides both an analogue & 4 Decade Digital readout, Inch or Metric readouts, mechanical Hi/Low tolerance arrows, and comes with 8 selectable sensitivity ranges. Selectable for ID or OD measurements this system exceeds the capability and versatility of older systems it can replace and allows the user to easily configure the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Operates on 4 D Cell Batteries or AC adapter. Shipped with air inlet hose, ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20). (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:AEC 30-10
Price:
$1,290.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
WG Single Master MilliCheck
|
| |
D-2500, D4000, EAG-31XXX, D-5000, D-8000 and EAG-32XXX Federal and Mahr Federal Dial type and digital Air gage systems and can be easily replaced by the Western Gage MilliCheck (AEC-30-60) series with superior resolution and stability. It provides both an analogue & 4 Decade Digital readout, Inch or MM readout, mechanical Hi/Low tolerance arrows, comes with 8 selectable sensitivity ranges. Selectable for ID or OD measurements this system exceeds the capability and versatility of both old and new systems from other manufacturers. Factory configured for Single mastering air tooling in use or can be supplied with new air tooling from WGC. Operates on 4 D Cell Batteries or AC adapter. Shipped with air inlet hose and 3/8-32 chuck adapter. (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:AEC 30-60
Price:
$1,290.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
WG Single Master MilliCheck High Precision
|
| |
D-20000, D-32000, D-10000, D-16000, EAG-33XXX and EAG-34XXX display units from Federal & Mahr Federal can be replaced by the Western Gage MilliCheck (AEC-30-70) series with superior resolution and stability . It provides both an analogue & 4 Decade Digital readout, Inch or MM readouts, Mechanical Hi/Low tolerance arrows, comes with 8 selectable sensitivity ranges. Selectable for ID or OD measurements this system exceeds the capability and versatility of both old and new systems from other manufacturers. Factory configured for Single mastering air tooling in use or can be supplied with new air tooling from WGC. Operates on 4 D Cell Batteries or AC adapter. Shipped with air inlet hose and 9/32-40 chuck adapter. (Always use a coalescent filter regulator be used on input air supply.)
Mfr: As Indicated
Code:AEC 30-70
Price:
$1,290.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
WG Single Master MilliCheck Wide Range
|
| |
D-1250 and EAG-30XXX dial or digital display units from Federal or Mahr Federal can be easily replaced with the Western Gage MilliCheck (AEC-30-80) series with superior resolution and stability. It provides both an analogue & 4 Decade Digital readout, Inch or MM readouts, Mechanical Hi/Low tolerance arrows, comes with 8 selectable sensitivity ranges. Selectable for ID or OD measurements this system exceeds the capability and versatility of both oldr and new systems from other manufacturers. Factory configured for Single mastering air tooling in use or can be supplied with new air tooling from WGC. Operates on 4 D Cell Batteries or AC adapter. Shipped with air inlet hose and 3/8-32 chuck adapter. (Always use a coalescent filter regulator input air supply.)
Mfr: As Indicated
Code:AEC 30-80
Price:
$1,290.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Dual Master Single Display
|
| |
Edmunds Gage, Moore Gage, Air Gage, Etamic, Sheffield A-E air columns and other adjustable Dial Type air or air -electronic systems can be replaced with the MICRO II (AEQ-40-11-10) series with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:AEQ40-11-10
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-2500
|
| |
D-2500 unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-2500
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-5000
|
| |
D-5000 unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-5000
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-4000
|
| |
D-4000 unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-4000
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-8000
|
| |
D-8000 unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-8000
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-10000
|
| |
D-10000 unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-10000
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-16000
|
| |
D-16000 unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-16000
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-20000
|
| |
D-20000 unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-20000
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-32000
|
| |
D-10000 unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-32000
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-2500M
|
| |
D-2500M unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-2500M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-5000M
|
| |
D-5000M unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-5000M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-4000M
|
| |
D-4000M unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-4000M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-8000M
|
| |
D-8000M unit and EAG32XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-8000M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-10000M
|
| |
D-10000M unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-10000M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-16000M
|
| |
D-16000M unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-16000M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-20000M
|
| |
D-20000M unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-20000M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
| |
Micro II Replacement for D-32000M
|
| |
D-32000M unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with air inlet hose, power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
Mfr: As Indicated
Code:D-32000M
Price:
$1,980.00
In Basket:
none
|
| |
|
|
|
| |
|
|
