|
Hose Assembly, 3 Ft.
|
|
Hose Assembly, 3 Ft. - .38-32 UNEF, Series 60-80 normally one of these hoses is required for each gage plug or ring ordered
Mfr: As Indicated
Code:AHA-63
Price:
$45.00
In Basket:
none
|
|
|
|
|
|
|
.183-.240in / 4.65-6.10mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 7.14mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-.183-.240in / 4.65-6.10mm
Price:
$1,344.00
In Basket:
none
|
|
|
|
|
|
|
.240-300in / 6.10-7.62mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 7.14mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-.240-300in / 6.10-7.62mm
Price:
$1,206.00
In Basket:
none
|
|
|
|
|
|
|
.300-.760in / 7.62-19.30mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 9.53mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-.300-.760in / 7.62-19.30mm
Price:
$1,004.00
In Basket:
none
|
|
|
|
|
|
|
.760-1.135in / 19.30-28.83mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 12.7mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-.760-1.135in / 19.30-28.83mm
Price:
$1,070.00
In Basket:
none
|
|
|
|
|
|
|
1.135-1.760in / 28.83-4470mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 12.7mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-1.135-1.760in / 28.83-4470mm
Price:
$1,148.00
In Basket:
none
|
|
|
|
|
|
|
1.762-2.510in / 44.70-63.75mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 14.22mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-1.762-2.510in / 44.70-63.75mm
Price:
$1,339.00
In Basket:
none
|
|
|
|
|
|
|
2.510-3.010in / 63.75-76.45mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 14.22mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-2.510-3.010in / 63.75-76.45mm
Price:
$1,462.00
In Basket:
none
|
|
|
|
|
|
|
3.010-4.0in / 76.45-101.6mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 15.88mm, Specification 63 compatible with WG Micro II and Millitest units as well as Mahr-Federal D-5000, D-8000 & EAG-32XXX. The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-63-C-3.010-4.0in / 76.45-101.6
Price:
$1,791.00
In Basket:
none
|
|
|
|
|
|
|
.183-.240in / 4.65-6.10mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 7.14mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-.183-.240in / 4.65-6.10mm
Price:
$1,344.00
In Basket:
none
|
|
|
|
|
|
|
.240-300in / 6.10-7.62mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 7.14mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-.240-300in / 6.10-7.62mm
Price:
$1,206.00
In Basket:
none
|
|
|
|
|
|
|
.300-.760in / 7.62-19.30mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 9.53mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-.300-.760in / 7.62-19.30mm
Price:
$1,004.00
In Basket:
none
|
|
|
|
|
|
|
.760-1.135in / 19.30-28.83mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 12.7mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-.760-1.135in / 19.30-28.83mm
Price:
$1,070.00
In Basket:
none
|
|
|
|
|
|
|
1.135-1.760in / 28.83-4470mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 12.7mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-1.135-1.760in / 28.83-4470mm
Price:
$1,148.00
In Basket:
none
|
|
|
|
|
|
|
1.762-2.510in / 44.70-63.75mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 14.22mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-1.762-2.510in / 44.70-64.75mm
Price:
$1,339.00
In Basket:
none
|
|
|
|
|
|
|
2.510-3.010in / 63.75-76.45mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 14.22mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-2.510-3.010in / 64.75-76.45mm
Price:
$1,462.00
In Basket:
none
|
|
|
|
|
|
|
3.010-4.0in / 76.45-101.6mm Air Ring Gage
|
|
Western Gage Chrome plated Air Ring Sizes within the range indicated with nozzle in center of ring body A dimension is 15.88mm, Specification 64 compatible with WG Micro II and Millitest units as well as Mahr-Federal D2500, D5000 The air probe ring will be ground to your specific target size as you indicate on the order form. Thread size is 38-32 UNEF. Please specify air unit this ring will be connected to. Note Master(s) will be required for final setting of the air ring so you will need to order either a single or Min Max masters shown below or be prepared to send your existing master(s) in to allow us to compete your order. Different hose lengths and extensions or specials will need to be quoted based on your part prints.
Mfr: As Indicated
Code:ARC-64-C-3.010-4.0in / 76.45-101.6
Price:
$1,791.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-.135-.385 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master with handles, Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-.135-.385
Price:
$197.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-.385-.635 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-.385-.635
Price:
$198.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-.635-.825 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-.635-.825
Price:
$200.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-.825-1.135 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-.825-1.135
Price:
$213.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-1.135-1.510 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-1.135-1.510
Price:
$235.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-1.510-2.010 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-1.510-2.010
Price:
$254.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-2.010-2.510 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-2.010-2.510
Price:
$298.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-2.510-3.010 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-2.510-3.010
Price:
$332.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-3.010-3.510 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-3.010-3.510
Price:
$438.00
In Basket:
none
|
|
|
|
|
|
|
MSD-XX-C-3.010-3.510 Inch/ MM Master setting disc
|
|
One, Western Gage, Chrome plated Disk Master Bilateral tolerance, ground to the nominal (or Min or Max) size between the range listed in the code shown for this product. If you require min and max masters be sure to enter this code twice and specify the target size for each and if it is to be a min or a max master when you complete your order.
Mfr: As Indicated
Code:MSD-XX-C-3.510-4.010
Price:
$445.00
In Basket:
none
|
|
|
|
|
|