|
|
Micro II Replacement for D-10000
|
D-10000 unit and EAG33XXX from Federal or Mahr Federal is easily replaced with the MICRO II (AEQ-40-11-60) with superior resolution and stability. It provides both a bi-color analogue display plus a 7 Digital readout, (0.000000) Inch or 0.0000) MM readouts. Electronic Hi/Low tolerance limits, Scaling is automatically based on the tolerances set. Selectable inch/ mm and ID or OD measurements with TIR function. This system exceeds the capability and versatility of other systems it can replace, and allows easy configuration of the unit for almost any dual mastering air tooling in use or can be supplied with new air tooling from WGC. Shipped with power cord and ACA-0 male flare chuck adapter or specify your air tooling thread type when ordering, (.19-32, .25-28 or .50-20) (Always use a coalescent filter regulator on input air supply.)
|
|
Click Here for Reference Material
Click Here for Selection Guide
Mfr: As Indicated
Code: D-10000
Price:
$2,385.00
Quantity in Basket: none
|
|
|